Obstruction Lighting Solutions

Flashes for Aerian Obstruction :

The JX 3300 obstacle light is designed to indicate to aircraft the presence of a high obstacle. it is available in white or red.

Helistation Device FLASHELEK meets the requirements of theICAO (Chapter 14) and FAA.

A single wind turbine or wind turbine farms, which has the potential to endanger aviation in navigable airspace or has the potential to interfere with the operation of navigation, should be lighted.

Telecommunications & Radio Towers are, typically, tall structures designed to support antennas for telecommunications and broadcasting, including television. They are among the tallest man-made structures.

A crane is a type of tall machine, generally equipped with a hoist rope, wire ropes or chains, and sheaves that can be used both to lift and lower materials and to move them horizontally.

Tall structures and building either temporary or permanent, which has the potential to endanger aviation in navigable airspace or has the potential to interfere with the operation of navigation, should be lighted.

Bridges and other major projects, which has the potential to endanger aviation in navigable airspace or has the potential to interfere with the operation of navigation, should be lighted.

A chimney is a typical cylindrical and vertical structure that provides ventilation for hot flue gases or smoke from a boiler, stove, furnace or fireplace to the outside atmosphere, flare stacks lights may be displayed as low as 20 feet (6-m) below the top to avoid effect of deposits.

jx3300

Device JX3300

The JX 3300 helistation beacon is designed to indicate to pilots the presence of Aerial Obstacles. The typical applications are the Wind Turbines, the Cranes, the Pylons, the Buildings, the Bridges, the Industrial Chimneys and all Obstacles of great heights...

Flashing light head

The FLASHELEK xenon lamp is specially developed to cover a 360° azimuth and the elevation corresponding to ICAO requirements.

Energy by flash:
Maximum intensity in white:
Flash period:
Optional Bright selection:
Brightness switching:
Alarm Return:

Operating voltage:
Energy consumption:
Power factor:

Ambient operating temperature:

Exterior Sizes:
Weight of Control Box:
Weight of Flashing light head:

 

 

150 J
20 000 cd
2 s
100% (day), 20% (night)
Contact sec.
A relay close when the alarm occurs.

230 V AC 50/60 Hz +/- 10% (110V AC 60 Hz on request)
less than 200 W
better than 0.95

-25 °C to + 55 °C ( drying resistance optional can be installed when the relative humidity is particularly high or the outside temperature is particularly low).
IP 66 protection rating

400 mm x 300 mm x 160 mm
11 kg
7 kg

The device comes with a 5 m long fire cable, a 5 m long remote control cable and a 2 m long power cable.

Une photocell optional can be connected to switch the brightness automatically.

Download the documents - Technical Documentation

Documents en English